TestOut TestOut Network Pro English 5.0.10 Actions 10.3.4 Create a Home Wireless Network You are working on a small office/home office (SOHO) network. The home owner recently changed his Internet Service Provider (ISP) and has an existing Ethernet router connected to an RJ45 jack on the wall plate. He has a new laptop and would like to connect this laptop to the Internet with a wireless connection. You need to create a wireless network. Create a wireless network as follows: Select a wireless access point that meets the following criteria: • Transmission speeds up to 600 Mbps. - Backwards compatible with other wireless standards which use 2.4GHz. • Install the wireless access point: Place the wireless access point on the computer desk. Select the correct cable to connect the wireless access point to a free LAN port on the existing router. Connect power to the wireless access point through an outlet on the surge protector or wall plate. Configure the owner's new laptop to connect to the wireless network: - Slide the wireless switch on the front of the laptop to the on (On) position. This will enable the integrated wireless network interface card on the laptop. - Use the default settings as you connect the laptop to the wireless network, and save the wireless profile with these settings. Start Lab