Narutoseriesidn
Answered

IDNLearn.com: Your destination for reliable and timely answers to any question. Our community is ready to provide in-depth answers and practical solutions to any questions you may have.

2 Blocks 1 and 2 rest on rough surfaces with coefficient of frictions ¢1 and ¢2 respectively. The blocks
are connected by a cable that runs over a smooth pulley and are in equilibrium as shown below with the following values.

W2 = 50N
thetha 1 = 30 degrees
thetha 2= 40 degrees
¢1= 0.3
¢2= 0.25

a. If Block 2 is on the verge of sliding down the plane, what is the minimum weight W1, required for equilibrium?
b. If Block 2 is on the verge of sliding up the plane, what is the minimum weight W1, required for equilibrium
? Do not consider overturning.
​

2 Blocks 1 And 2 Rest On Rough Surfaces With Coefficient Of Frictions 1 And 2 Respectively The Blocksare Connected By A Cable That Runs Over A Smooth Pulley And class=

Sagot :

Answer:

  • 100N
  • 25N

Explanation:

a) On the verge of tipping over, reaction acts at the corner A

When slippage occurs,

Block moves w/ const. velocity  equilibrium

Three-force member: reaction at A must pass through B

tan b/2h, h b/ 2 θ µ = = ∴= k k ( µ )

b) When slippage occurs,

Block moves w/ const. velocity  equilibrium

Three-force member: reaction at C must pass through G

k tanθ µ =

tan x/ H/2 , x H/2

Thank you for using this platform to share and learn. Keep asking and answering. We appreciate every contribution you make. IDNLearn.com is committed to providing accurate answers. Thanks for stopping by, and see you next time for more solutions.