Answered

IDNLearn.com offers a comprehensive platform for finding and sharing knowledge. Get step-by-step guidance for all your technical questions from our knowledgeable community members.

A brass alloy is known to have a yield strength of 275 MPa (40,000 psi), a tensile strength of 380 MPa (55,000 psi), and an elastic modulus of 103 GPa (15.0×106 psi). A cylindrical specimen of this alloy 5.4 mm (0.21 in.) in diameter and 225 mm (8.87 in.) long is stressed in tension and found to elongate 6.8 mm (0.27 in.). On the basis of the information given, is it possible to compute the magnitude of the load that is necessary to produce this change in length? If not, explain why.

Sagot :

Batolisisidn

Answer:

The magnitude of the load can be computed  because it is mandatory in order to produce the change in length ( elongation )

Explanation:

Yield strength = 275 Mpa

Tensile strength = 380 Mpa

elastic modulus = 103 GPa

The magnitude of the load can be computed  because it is mandatory in order to produce the change in length ( elongation ) .

Given that the yield strength, elastic modulus and strain that is experienced by the test spectrum are given

strain = yield strength / elastic modulus

          = 0.0027

Thank you for contributing to our discussion. Don't forget to check back for new answers. Keep asking, answering, and sharing useful information. IDNLearn.com is your go-to source for dependable answers. Thank you for visiting, and we hope to assist you again.