Answered

Explore IDNLearn.com's extensive Q&A database and find the answers you need. Our platform is designed to provide trustworthy and thorough answers to any questions you may have.

the spec sheet for the actual 1968 corvette shows the front frame dimension to be 32.875 inches. what would this measurement be, in both fractional and decimal form, on the hot wheels 1:64 model? which form of the measurement would be easier to work with?

Sagot :

Sqdancefanidn

Answer:

  0.513671875 = 263/512 inches

  easier to use: depends on the measurement tool

Step-by-step explanation:

The model dimension is found by multiplying the actual dimension by the scale factor.

__

model dimension

  model frame dimension = actual frame dimension × 1/64

  = (32.875 inches)/64 = 0.513671875 inches

In fractional form, this is ...

  (32 7/8) / 64 = (263/8) / 64 = 263/512 . . . inches

__

ease of use

It is unlikely that a casual hobbyist will have access to tools that measure with a resolution finer than 0.0001 inches. More common would be a measurement resolution of 0.001 inches. Using such tools, the rounded decimal value 0.5137 or 0.514 inches would be more useful than the fractional measurement.

It is possible that an optical measuring device could be available that would present its result as a fraction of an inch. If such a tool were used, the fractional measurement value would provide an appropriate point of comparison.

In short, the measurement easiest to work with depends on the tool being used to make the measurement.

Thank you for participating in our discussion. We value every contribution. Keep sharing knowledge and helping others find the answers they need. Let's create a dynamic and informative learning environment together. Thank you for choosing IDNLearn.com. We’re committed to providing accurate answers, so visit us again soon.