Answered

Find expert answers and community-driven knowledge on IDNLearn.com. Get the information you need from our experts, who provide reliable and detailed answers to all your questions.

A metal plate has the form of a quarter circle with a radius of R = 106cm . Two 3 cm holes are to be drilled in the plater r = 95cm from the corner at 30 degrees and 60as shown above. To use a computer controlled milling machine you must know the Cartesian coordinates of the holes. Assuming the origin is at the corner what are the coordinates of the holes (x_{1}, y_{1}) and (x_{2}, y_{2}) ? Round your answer to 3 decimal places

A Metal Plate Has The Form Of A Quarter Circle With A Radius Of R 106cm Two 3 Cm Holes Are To Be Drilled In The Plater R 95cm From The Corner At 30 Degrees And class=

Sagot :

[tex]\begin{gathered} (x_1,y_1)--\gt(0.866,0.500) \\ (x_2,y_2)--\gt(0.500,0.866) \end{gathered}[/tex]

1) Considering that this quarter circle is one sector of the unit circle and that

[tex]30^{\circ}=\frac{\pi}{6}[/tex]

2) Let's sketch this out to better grasp the idea:

Note that the first coordinate will be given by its cos(theta), and the second one by its sine(theta)

3) Based on that principle, we can tell the following:

[tex]\begin{gathered} (x_1,y_1)--->(cos(30^{\circ}),\sin(30^{\circ}))=(\frac{\sqrt{3}}{2},\frac{1}{2}) \\ \\ (x_{2,}y_2)-->(\cos(60),\sin(60))=(\frac{1}{2},\frac{\sqrt{3}}{2}) \\ \end{gathered}[/tex]

As the holes need to be drilled by the machine, so we need to find approximations to those coordinates:

[tex]\begin{gathered} (x_1,\:y_1)-->(0.866,0.500) \\ (x_2,y_2)-->(0.500,0.866) \end{gathered}[/tex]

Thus, these are the coordinates to be put into the computer.

View image RykarP390909
Thank you for joining our conversation. Don't hesitate to return anytime to find answers to your questions. Let's continue sharing knowledge and experiences! Your search for solutions ends at IDNLearn.com. Thank you for visiting, and we look forward to helping you again.