From tech troubles to travel tips, IDNLearn.com has answers to all your questions. Whether it's a simple query or a complex problem, our experts have the answers you need.
Sagot :
To determine which among the substances [tex]\( X \)[/tex], [tex]\( Y \)[/tex], and [tex]\( Z \)[/tex] is a catalyst for the reaction [tex]\( A + B \rightarrow C \)[/tex], we can design the following step-by-step experiment:
### Step-by-Step Experimental Design
#### Preparation
1. Prepare Reagents:
- Ensure you have clean containers and precise measuring equipment.
- Label containers clearly for each substance: [tex]\( A \)[/tex], [tex]\( B \)[/tex], [tex]\( X \)[/tex], [tex]\( Y \)[/tex], and [tex]\( Z \)[/tex].
#### Control Experiment (Without Catalyst)
2. Set Up the Control Reaction:
- Measure and add [tex]\( 10 \, \text{mL} \)[/tex] of substance [tex]\( A \)[/tex] and [tex]\( 10 \, \text{mL} \)[/tex] of substance [tex]\( B \)[/tex] into a clean reaction container.
3. Measure Reaction Time:
- Start a stopwatch as soon as both substances are mixed.
- Observe the formation of bubbles and record the exact time it takes for the reaction to complete. This time is your control time, which we already know to be [tex]\( 20 \)[/tex] seconds.
4. Record the Control Time:
- Note: [tex]\( \text{Control Time} = 20 \)[/tex] seconds
#### Testing with Substances [tex]\( X \)[/tex], [tex]\( Y \)[/tex], and [tex]\( Z \)[/tex]
5. Test with Substance [tex]\( X \)[/tex]:
- Measure and add [tex]\( 10 \, \text{mL} \)[/tex] of substance [tex]\( A \)[/tex] and [tex]\( 10 \, \text{mL} \)[/tex] of substance [tex]\( B \)[/tex] into a clean reaction container.
- Add a small measured amount of substance [tex]\( X \)[/tex] to the mixture of [tex]\( A \)[/tex] and [tex]\( B \)[/tex].
- Start the stopwatch as soon as the substances are mixed.
- Observe the formation of bubbles and record the exact reaction time in seconds.
6. Repeat for Substances [tex]\( Y \)[/tex] and [tex]\( Z \)[/tex]:
- Perform the exact same steps as for substance [tex]\( X \)[/tex], but this time add either substance [tex]\( Y \)[/tex] or [tex]\( Z \)[/tex] respectively.
- Ensure precise measurements and start the stopwatch immediately as mixing occurs.
- Record the reaction time for each test with substance [tex]\( Y \)[/tex] and [tex]\( Z \)[/tex].
#### Data Recording and Analysis
7. Record Reaction Times:
- Let’s denote the recorded reaction times as follows:
- [tex]\( t_X = \)[/tex] time in seconds with substance [tex]\( X \)[/tex]
- [tex]\( t_Y = \)[/tex] time in seconds with substance [tex]\( Y \)[/tex]
- [tex]\( t_Z = \)[/tex] time in seconds with substance [tex]\( Z \)[/tex]
8. Analyze the Results:
- Compare the reaction times [tex]\( t_X \)[/tex], [tex]\( t_Y \)[/tex], and [tex]\( t_Z \)[/tex] with the control time of [tex]\( 20 \)[/tex] seconds.
- The substance that significantly reduces the reaction time (compared to the control time of [tex]\( 20 \)[/tex] seconds) is identified as the catalyst.
### Expected Outcome Interpretation
- If the reaction time with substance [tex]\( X \)[/tex] is significantly less than [tex]\( 20 \)[/tex] seconds, then substance [tex]\( X \)[/tex] is likely the catalyst.
- Similarly, if the reaction time with substance [tex]\( Y \)[/tex] or [tex]\( Z \)[/tex] is significantly less than [tex]\( 20 \)[/tex] seconds, then that substance is the catalyst.
### Summary of Key Data Points:
- Control Reaction Time: [tex]\( 20 \)[/tex] seconds
- Variable Reaction Times with Substances:
- Substance [tex]\( X \)[/tex]: Record in seconds
- Substance [tex]\( Y \)[/tex]: Record in seconds
- Substance [tex]\( Z \)[/tex]: Record in seconds
By following this detailed experimental procedure, you will be able to identify which substance among [tex]\( X \)[/tex], [tex]\( Y \)[/tex], and [tex]\( Z \)[/tex] acts as a catalyst for the reaction [tex]\( A + B \rightarrow C \)[/tex].
### Step-by-Step Experimental Design
#### Preparation
1. Prepare Reagents:
- Ensure you have clean containers and precise measuring equipment.
- Label containers clearly for each substance: [tex]\( A \)[/tex], [tex]\( B \)[/tex], [tex]\( X \)[/tex], [tex]\( Y \)[/tex], and [tex]\( Z \)[/tex].
#### Control Experiment (Without Catalyst)
2. Set Up the Control Reaction:
- Measure and add [tex]\( 10 \, \text{mL} \)[/tex] of substance [tex]\( A \)[/tex] and [tex]\( 10 \, \text{mL} \)[/tex] of substance [tex]\( B \)[/tex] into a clean reaction container.
3. Measure Reaction Time:
- Start a stopwatch as soon as both substances are mixed.
- Observe the formation of bubbles and record the exact time it takes for the reaction to complete. This time is your control time, which we already know to be [tex]\( 20 \)[/tex] seconds.
4. Record the Control Time:
- Note: [tex]\( \text{Control Time} = 20 \)[/tex] seconds
#### Testing with Substances [tex]\( X \)[/tex], [tex]\( Y \)[/tex], and [tex]\( Z \)[/tex]
5. Test with Substance [tex]\( X \)[/tex]:
- Measure and add [tex]\( 10 \, \text{mL} \)[/tex] of substance [tex]\( A \)[/tex] and [tex]\( 10 \, \text{mL} \)[/tex] of substance [tex]\( B \)[/tex] into a clean reaction container.
- Add a small measured amount of substance [tex]\( X \)[/tex] to the mixture of [tex]\( A \)[/tex] and [tex]\( B \)[/tex].
- Start the stopwatch as soon as the substances are mixed.
- Observe the formation of bubbles and record the exact reaction time in seconds.
6. Repeat for Substances [tex]\( Y \)[/tex] and [tex]\( Z \)[/tex]:
- Perform the exact same steps as for substance [tex]\( X \)[/tex], but this time add either substance [tex]\( Y \)[/tex] or [tex]\( Z \)[/tex] respectively.
- Ensure precise measurements and start the stopwatch immediately as mixing occurs.
- Record the reaction time for each test with substance [tex]\( Y \)[/tex] and [tex]\( Z \)[/tex].
#### Data Recording and Analysis
7. Record Reaction Times:
- Let’s denote the recorded reaction times as follows:
- [tex]\( t_X = \)[/tex] time in seconds with substance [tex]\( X \)[/tex]
- [tex]\( t_Y = \)[/tex] time in seconds with substance [tex]\( Y \)[/tex]
- [tex]\( t_Z = \)[/tex] time in seconds with substance [tex]\( Z \)[/tex]
8. Analyze the Results:
- Compare the reaction times [tex]\( t_X \)[/tex], [tex]\( t_Y \)[/tex], and [tex]\( t_Z \)[/tex] with the control time of [tex]\( 20 \)[/tex] seconds.
- The substance that significantly reduces the reaction time (compared to the control time of [tex]\( 20 \)[/tex] seconds) is identified as the catalyst.
### Expected Outcome Interpretation
- If the reaction time with substance [tex]\( X \)[/tex] is significantly less than [tex]\( 20 \)[/tex] seconds, then substance [tex]\( X \)[/tex] is likely the catalyst.
- Similarly, if the reaction time with substance [tex]\( Y \)[/tex] or [tex]\( Z \)[/tex] is significantly less than [tex]\( 20 \)[/tex] seconds, then that substance is the catalyst.
### Summary of Key Data Points:
- Control Reaction Time: [tex]\( 20 \)[/tex] seconds
- Variable Reaction Times with Substances:
- Substance [tex]\( X \)[/tex]: Record in seconds
- Substance [tex]\( Y \)[/tex]: Record in seconds
- Substance [tex]\( Z \)[/tex]: Record in seconds
By following this detailed experimental procedure, you will be able to identify which substance among [tex]\( X \)[/tex], [tex]\( Y \)[/tex], and [tex]\( Z \)[/tex] acts as a catalyst for the reaction [tex]\( A + B \rightarrow C \)[/tex].
Thank you for contributing to our discussion. Don't forget to check back for new answers. Keep asking, answering, and sharing useful information. Your questions deserve reliable answers. Thanks for visiting IDNLearn.com, and see you again soon for more helpful information.
