Get comprehensive solutions to your problems with IDNLearn.com. Find reliable solutions to your questions quickly and easily with help from our experienced experts.
Sagot :
To determine the elongation of a steel bar that tapers from a diameter of 100 mm at the top to 50 mm at the bottom over a length of 1 meter under its own weight, we'll follow a detailed, step-by-step solution. Given the unit weight of steel is 78.5 kN/m³ and the Young's modulus \( E \) is 200 GPa, let's proceed with the calculations.
### Step-by-Step Solution
#### Step 1: Parameters and Conversions
First, convert all necessary parameters into consistent SI units:
- Lower diameter (at the bottom), \( D_1 \): 50 mm = 50 × 10\(^{-3}\) m = 0.050 m
- Upper diameter (at the top), \( D_2 \): 100 mm = 100 × 10\(^{-3}\) m = 0.100 m
- Length of the bar, \( L \): 1 meter
- Unit weight of steel, \( \gamma \): 78.5 kN/m³ = 78.5 × 10³ N/m³
- Young's modulus, \( E \): 200 GPa = 200 × 10^9 Pa
#### Step 2: Radii Calculations
- Radius at the bottom, \( r_1 \): \( \frac{D_1}{2} = \frac{0.050}{2} \) m = 0.025 m
- Radius at the top, \( r_2 \): \( \frac{D_2}{2} = \frac{0.100}{2} \) m = 0.050 m
#### Step 3: Cross-sectional Area at Any Point \( x \)
To find the cross-sectional area at any point \( x \) along the length of the bar, we first find the radius at that point:
[tex]\[ r(x) = r_1 + \left(\frac{r_2 - r_1}{L}\right) x \][/tex]
The cross-sectional area \( A(x) \) at point \( x \) is given by:
[tex]\[ A(x) = \pi [r(x)]^2 = \pi \left[ r_1 + \left(\frac{r_2 - r_1}{L}\right) x \right]^2 \][/tex]
#### Step 4: Differential Element and Integrand
The weight of the bar is distributed along its length, thus the elongation \( \delta L \) due to a small segment \( dx \) can be described by:
[tex]\[ d(\delta L) = \frac{\gamma x \, dx}{E \cdot A(x)} \][/tex]
#### Step 5: Integration
Integrate from \( x = 0 \) to \( x = L \):
[tex]\[ \delta L = \int_0^L \frac{\gamma x \, dx}{E \cdot \pi \left[ r_1 + \left( \frac{r_2 - r_1}{L} \right) x \right]^2} \][/tex]
#### Step 6: Plug-In the Numbers
Solving this integral involves detailed calculus, but using the given parameters, after integration, the elongation of the bar can be found.
#### Step 7: Result
The resulting elongation of the bar, \(\delta L\), over its length \( L \) of 1 meter is:
[tex]\[ \delta L \approx 3.861 \times 10^{-5} \text{ meters} \][/tex]
Therefore, considering all derived steps and numerical integration:
- The lower radius \( r_1 = 0.025 \) m
- The upper radius \( r_2 = 0.050 \) m
- The length \( L = 1 \) m
- The elongation \( \delta L \approx 3.861 \times 10^{-5} \) meters
Hence, the elongation of the steel bar under its own weight is approximated to [tex]\( 3.861 \times 10^{-5} \)[/tex] meters.
### Step-by-Step Solution
#### Step 1: Parameters and Conversions
First, convert all necessary parameters into consistent SI units:
- Lower diameter (at the bottom), \( D_1 \): 50 mm = 50 × 10\(^{-3}\) m = 0.050 m
- Upper diameter (at the top), \( D_2 \): 100 mm = 100 × 10\(^{-3}\) m = 0.100 m
- Length of the bar, \( L \): 1 meter
- Unit weight of steel, \( \gamma \): 78.5 kN/m³ = 78.5 × 10³ N/m³
- Young's modulus, \( E \): 200 GPa = 200 × 10^9 Pa
#### Step 2: Radii Calculations
- Radius at the bottom, \( r_1 \): \( \frac{D_1}{2} = \frac{0.050}{2} \) m = 0.025 m
- Radius at the top, \( r_2 \): \( \frac{D_2}{2} = \frac{0.100}{2} \) m = 0.050 m
#### Step 3: Cross-sectional Area at Any Point \( x \)
To find the cross-sectional area at any point \( x \) along the length of the bar, we first find the radius at that point:
[tex]\[ r(x) = r_1 + \left(\frac{r_2 - r_1}{L}\right) x \][/tex]
The cross-sectional area \( A(x) \) at point \( x \) is given by:
[tex]\[ A(x) = \pi [r(x)]^2 = \pi \left[ r_1 + \left(\frac{r_2 - r_1}{L}\right) x \right]^2 \][/tex]
#### Step 4: Differential Element and Integrand
The weight of the bar is distributed along its length, thus the elongation \( \delta L \) due to a small segment \( dx \) can be described by:
[tex]\[ d(\delta L) = \frac{\gamma x \, dx}{E \cdot A(x)} \][/tex]
#### Step 5: Integration
Integrate from \( x = 0 \) to \( x = L \):
[tex]\[ \delta L = \int_0^L \frac{\gamma x \, dx}{E \cdot \pi \left[ r_1 + \left( \frac{r_2 - r_1}{L} \right) x \right]^2} \][/tex]
#### Step 6: Plug-In the Numbers
Solving this integral involves detailed calculus, but using the given parameters, after integration, the elongation of the bar can be found.
#### Step 7: Result
The resulting elongation of the bar, \(\delta L\), over its length \( L \) of 1 meter is:
[tex]\[ \delta L \approx 3.861 \times 10^{-5} \text{ meters} \][/tex]
Therefore, considering all derived steps and numerical integration:
- The lower radius \( r_1 = 0.025 \) m
- The upper radius \( r_2 = 0.050 \) m
- The length \( L = 1 \) m
- The elongation \( \delta L \approx 3.861 \times 10^{-5} \) meters
Hence, the elongation of the steel bar under its own weight is approximated to [tex]\( 3.861 \times 10^{-5} \)[/tex] meters.
We value your participation in this forum. Keep exploring, asking questions, and sharing your insights with the community. Together, we can find the best solutions. IDNLearn.com is committed to your satisfaction. Thank you for visiting, and see you next time for more helpful answers.
